Locations And Functions Of Parts - Sony BKS-R1617 Operation Manual

Locations and Functions of Parts

BKS-R1617
1 ASSIGN button/lamp
Front panel
ASSIGN
PROT
5 PROT button/lamp
Rear panel
BKS-R1621
Front panel
Rear panel
1 ASSIGN button/lamp
This button has the following two functions:
Changing the assignment of a source select button
While holding down this button, press a source select
button, and the source name displayed in the preset
display window is assigned to the pressed button.
2 DEST button/lamp
DEST
LOCK
(CHOP)
6 LOCK (CHOP) button/lamp
1 ASSIGN button/lamp
2 DEST button/lamp
7 Source/destination select buttons
ASSIGN DEST
PROT LOCK
(CHOP)
SELECTOR
BKS-R1621
6 LOCK (CHOP) button/lamp
8 SELECTOR knob
4 Preset display window
5 PROT button/lamp
U
-AC IN
0 U (ground) connector
9 ~AC IN connector
3 Display window
7 Source/destination select buttons 8 SELECTOR knob
REMOTE 1
U
RS-232C
-AC IN
qs RS-232C connector
qa REMOTE 1 connector
0 U (ground) connector
9 ~AC IN connector
BKS-R1618
3 Display window
REMOTE 1
RS-232C REMOTE 2
qd REMOTE 2 connector
qs RS-232C connector
qa REMOTE 1 connector
Selecting the type
While holding down this button, turn the SELECTOR
knob and the type names appear in the preset display
window in sequence. When the desired name appears,
release the button, and turn only the SELECTOR
knob. The sources or destinations belonging to the
selected type name will appear on the preset display
window in sequence.
4 Preset display window
SELECTOR
BKS-R1617
REMOTE 2
qd REMOTE 2 connector
11