Table of Contents
Advertisement
Model
Frequency
No.
band
CE5157 TV51-53
TV54-56
TV57-59
CE6267 TV62-64
TV65-66
TV67-69
Changing the remote control
channel settings
The optimal channel for remote control of
the transmitter selected with the Target TX
setting will be automatically selected and
displayed under Remote CH.
You can select the Custom setting to enable
selection of remote control channels.
By selecting Custom and selecting a remote
control channel, you may be able to prevent
interference that may occur between the
RMU-01 and other wireless LAN systems
during remote control.
Note
When the Custom setting is used, the
automatically selected optimal remote
control channel for the transmitter you are
using will be ignored. In such cases, signals
sent from the transmitter may have an effect
on remote control. Be sure to confirm
operation before using the setting.
After changes are made, click OK to enter
the new settings and revert to the main
display.
If the new settings are valid, a message
indicating that setting is complete will
appear. If the settings are invalid, an error
Frequency
710.025 -
734.000 MHz
734.025 -
758.000 MHz
758.025 -
782.000 MHz
798.025 -
822.000 MHz
Not available
838.025 -
862.000 MHz
message appears. Follow the instructions in
the error message to correct the settings.
To change settings of the
RMU-01 again
Click the Search Devices button to update
the list of detected RMU-01 units. Then,
click the name of the device that you want
to change the settings.
To resume the main display
without changing the settings
Click the Cancel button.
Additional Functions
Two additional functions are available with
this software.
POWER indicator flasher: When
multiple RMU-01 units are connected to the
network, use this function to easily
distinguish the particular unit by operate the
POWER indicator on that unit to flash.
Self-check function: If an RMU-01 unit
does not work properly even when
connections and settings are correct,
perform self-check on the hardware of that
device.
On the list of detected RMU-01 units in the
main display, click the name of the device
to apply an additional function, and then
click the Option button.
The Option window for the device appears.
Using the RMU-01 Setting Tool
17
Advertisement
Table of Contents
