Detecting The Rmu-01 Units On; The Network Automatically; Changing The Settings Of The Rmu-01 - Sony RMU-01 Operating Instructions Manual

j Remote CH (remote channel) setting
display
This function appears when version 1.10 or
later of the RMU-01 software is used with
version 1.10 or later of the Setting Tool
software.
This shows the channel configured to be
used by the RMU-01 for remote control.
Initially, the factory-set channel is
displayed for all RMU-01 units, but the
setting can be changed using this software.
For details, see "Changing the Settings of the RMU-
01" on page 15.
k Version display
This function appears when version 1.10 or
later of the RMU-01 software is used with
version 1.10 or later of the Setting Tool
software.
This shows the software versions of the
RMU-01 units on the network.
Detecting the RMU-01
Units on the Network
Automatically
Click the Search Devices button to initiate
the automatic detection of RMU-01 units on
the network.
While the automatic detection is in
progress, the progress bar window appears.
When the detection finishes, information on
the detected RMU-01 units is listed in the
main window.
Note
With some PC's equipped with multiple
LAN ports (wired and wireless), the RMU-
01 units connected to a LAN port may not
be automatically detected even when you
click the Search Devices button.
If this happens, invalidate all ports
including LAN and IEEE1394 ports with
"Network Connections" on the OS, then
validate only the LAN port to which the
RMU-01 units are connected. And then,
restart the RMU-01 Setting Tool software
to perform automatic detection.
Changing the Settings of
the RMU-01
On the list of detected RMU-01 units in the
main display, click the name of the device
whose settings you want to change and
click the Setting button.
The Setting window for the device appears.
Changing the network
settings
To change the RMU-01's name
Enter a new name in the Name box. Up to
16 characters can be entered.
The following characters and a space can be
used.
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z
0 1 2 3 4 5 6 7 8 9 ! # & $ @ + - = _ ( ) [ ]
Using the RMU-01 Setting Tool 15