Yaesu FT2DR Instruction Manual page 75

APRS Set mode function list
PINNING: ON: The latitude and longitude data is fixed when the movement speed of
this device is 0.
OFF: The latitude and longitude are constantly calculated when the
movement speed of this device is 0.
DGPS: ON: Correction data is used from a geostationary satellite to improve the
accuracy.
OFF: Correction data from geostationary satellites is not used.
y 20 GPS POWER
ON/OFF setting for the GPS function.
Setting Item: GPS ON / GPS OFF
Default: GPS ON
Explanation: Turn the GPS function ON or OFF.
y 21 GPS TIME SET
ON/OFF of the GPS time and date automatic acquisition function.
Setting Item: AUTO / MANUAL
Default: AUTO
Explanation:
AUTO: Time data for the internal clock is automatically obtained from the GPS
function.
MANUAL: GPS time data is not used, and time set manually to the internal clock of this
transceiver is prioritized.
y 22 GPS UNIT
Unit setting for the GPS display.
Setting item:
Position: .MMM' / 'SS"
Speed: km/h / knot / mph
Altitude: m / ft
Default: Position: .MMM'
Speed: mph
Altitude: ft
Explanation:
Set the measurement unit for Altitude, Speed, Longitude and Latitude (Position).
Position: Unit for Longitude/Latitude can be changed.
MMM is 1/000 minute format. If MMM is SS, unit appear as minute-second
format.
Speed: Unit can be set to [km/h], [mph], or [knot].
Altitude: Unit can be set to [m] or [feet].
74