Yaesu FT2DR Instruction Manual page 52

6
Touch the SSID you want to set
No setting is required if SSID is not necessary.
7
Press the
Return to the APRS MESSAGE EDIT screen.
8
Touch [EDIT TEXT]
The screen for editing text will be displayed.
9
Enter the text
Refer to "Entering Letters" (
P.19) on how to enter text.
A maximum of up to 67 characters can be entered.
10
Press the
Return to the APRS MESSAGE EDIT screen.
11
Touch [M-TX]
The message will be sent and the display will return to
the frequency screen.
Tip
The data transmission delay time can be changed using the [APRS]
→ [12 APRS TX DELAY] setting in the set mode.
y Use fixed text to write a message
A character string registered in advance can be appended to a message text.
Refer to "Registering a standard message" (
1
Follow Steps 1-8 in "Input individual characters to write a
message" ( P.50)
key
FT2DR Operating Manual
key
Transmitting APRS
P.53) for the registration method.
51
messages
®