Yaesu FT2DR Instruction Manual page 67

APRS Set mode function list
DUP.MSG:
ACK.REJ:
OTHER MSG: ON / OFF
TX BCN:
TX MSG:
Default: Mic-E:
POSITION:
WEATHER:
OBJECT:
ITEM:
STATUS:
OTHER:
MY PACKET: ON
MSG:
GRP:
BLN:
MY MSG:
DUP.BCN:
DUP.MSG:
ACK.REJ:
OTHER MSG: ON
TX BCN:
TX MSG:
Explanation:
Set the bell sound for transmit/receive of APRS beacons and messages and the
conditions for when it rings.
Mic-E: Setting the sound of the bell that rings when a Mic-Encoder beacon is received.
POSITION: Setting for the sound of the bell that rings when a position beacon is received.
WEATHER: Setting for the sound of the bell that rings when a weather beacon is received.
OBJECT: Setting for the sound of the bell that rings when a object beacon is received.
ITEM: Setting for the sound of the bell that rings when an item beacon is received.
STATUS: Setting for the sound of the bell that rings when a status beacon is received.
OTHER: Setting for the sound of the bell that rings when a beacon other than what is used
by APRS is received.
MY PACKET: Setting for the sound of the bell that rings when a when a self transmitted beacon
(relay wave) is received.
MSG: Setting for the sound of the bell that rings when a new message is received.
GRP: Setting for the sound of the bell that rings when a group message is received.
BLN: Setting for the sound of the bell that rings when a bulletin message is received.
MY MSG: Setting for the sound of the bell that rings when a self transmitted message (relay
wave) is received.
DUP BCN: Setting for the sound of the bell that rings when a overlapping beacon is received.
DUP MSG: Setting for the sound of the bell that rings when a message that has already has
been received is received again.
ON / OFF
ON / OFF
ON / OFF
ON / OFF
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
66