Yaesu FT2DR Instruction Manual page 72

Explanation:
STATUS: OFF: Set to OFF when data terminal is not in use.
ON: Set to ON when using data terminal.
Various setting items are added when ON is selected.
SPEED: Set the communication speed for the data terminal.
INPUT: OFF: Deactivate the input function of the data terminal (negate function).
GPS: GPS data is obtained by connecting a commercially sold external GPS
device instead of the internal GPS function in this transceiver.
In this setting, information obtained from the internal GPS function is
negated.
Tip
OUTPUT: OFF:
GPS:
WAY.P: Output position information from APRS PACKET received from
WAYPOINT: Set the number of digits for CALLSIGN information of APRS BEACON
stations, attached to various data, when WAYPOINT is selected for
OUTPUT.
NMEA6: CALLSIGN is restricted to 6 digits to the right (example: if
NMEA7: CALLSIGN is restricted to 7 digits to the right (example: if
NMEA8: CALLSIGN is restricted to 8 digits to the right (example: if
NMEA9: CALLSIGN is restricted to 9 digits to the right (example: if
• If an external GPS device is connected to the data terminal, the time display
on the GPS screen appears as shown below.
aa (hour): bb (minute)
• The GPS function in this transceiver uses data in $GPRMC in NMEA-0183
format and $GPGGA data.
In order to use an external GPS device, the device must be able to
output data of this type.
• When using an external GPS device, setting the Set mode option [APRS]
→ [20 GPS POWER] to OFF will deactivate the internal GPS function and
reduce battery consumption.
Deactivate the input function of the data terminal (negate
function).
Output GPS data ($GPRMC in NMEA-0183 format or $GPGGA
data) obtained by this transceiver.
a BEACON received from another station as WAYPOINT data
($GPWPL in NMEA-0183 format).
JQ1YBG-14 is received, CALLSIGN information appears as
[YBG-14]).
JQ1YBG-14 is received, CALLSIGN information appears as
[1YBG-14]).
JQ1YBG-14 is received, CALLSIGN information appears as
[Q1YBG-14]).
JQ1YBG-14 is received, CALLSIGN information appears as
[JQ1YBG-14]).
APRS Set mode function list
71