Yaesu FT2DR Instruction Manual page 39

Transmitting APRS
7
Turn the DIAL to select "TX RATE" and press the
key
The frequency for transmitting status text when sending
an APRS beacon can be set in TX RATE.
8
Turn the DIAL to select the TX RATE
Select the rate from 1/1 (every time) to 1/8 (once in 8
times).
9
Press the
10
Turn the DIAL to select "TEXT" and press the
11
Turn the DIAL to select the number of the status text to
register
12
Press the
The screen for editing text will be displayed.
The text contents will be displayed if text was already
entered.
Press the
13
Touch [EDIT TEXT]
14
Enter the text
Refer to "Entering Letters" (
P.19) on how to enter text.
15
Press
To exit the set mode and return to the operating screen.
beacons
®
key
key
key to return to the previous screen.
FT2DR Operating Manual
key
38