Yaesu FT2DR Instruction Manual page 68

ACK REJ: Setting for the sound of the bell that rings when response data (ACK, REJ) of a
message sent by your station is received.
OTHER MSG: Setting for the sound of the bell that rings when a message addressed to another
destination is received.
TX BCN: Setting for the sound of the bell that rings when a beacon is being sent from your
station.
TX MSG: Setting for the sound of the bell that rings when a message is being sent from
your station.
y 11 APRS UNIT
Unit setting for APRS display.
Setting item: Position: MM.MM' / MM'SS"
Distance: km / mile
Speed:
Altitude: m / ft
Temp:
Rain:
Wind:
Default: Position: MM.MM'
Distance: mile
Speed:
Altitude: ft
Temp:
Rain:
Wind:
Explanation:
Set the measurement unit for Latitude/Longitude (Position), Distance, Speed, Altitude,
Temperature (Temp), Precipitation (Rain), and Wind Speed (Wind).
Position: Unit display of minute of Longitude/Latitude (DD° MM.MM') can be changed.
MM' is displayed in 1/100 minute and SS" in seconds.
Distance: Unit can be set to [km] or [mile].
Speed: Unit can be set to [km] or [mile].
Altitude: Unit can be set to [m] or [feet].
Temp: Units can be set to [°C] or [°F].
Rain: Unit can be set to [mm] or [inch].
Wind: Unit can be set to [m/s] or [mph].
km/h / knot / mph
°C / °F
mm / inch
m/s / mph
mph
°F
inch
mph
APRS Set mode function list
67