Yaesu FT2DR Instruction Manual page 71

APRS Set mode function list
y 16 BEACON TX
Set the automatic beacon transmit interval.
Setting Item: MANUAL / AUTO
Default: MANUAL
Explanation:
Set the method the APRS BEACON is automatically transmitted.
You can also change the transmission method by touching
LIST or APRS STATION LIST screen and then touching the appropriate [BEACON].
MANUAL: Touch [F MW] followed by [BCN-TX] to transmit the APRS BEACON.
Touch
TX] to transmit.
AUTO: An APRS BEACON of your station is transmitted automatically according to
BEACON INTERVAL settings.
SMART: A BEACON is automatically transmitted using the SmartBeaconing
function.
This setting can only be selected if: STATUS setting in [APRS] → [27
SmartBeaconing] is set between Type 1 and Type 3, and [APRS] → [24
MY POSITION] is set to GPS.
y 17 COM PORT SETTING
COM Port setting
Setting Item: STATUS:
SPEED:
INPUT:
OUTPUT:
WAYPOINT: NMEA9 / NMEA6 / NMEA7 / NMEA8
Mic-E:
POSIT:
WEATHER: ON / OFF
OBJECT:
ITEM:
Default: STATUS:
SPEED:
INPUT:
OUTPUT:
WAYPOINT: NMEA9
Mic-E:
POSIT:
WEATHER: ON
OBJECT:
ITEM:
/ SMART
in the APRS STATION LIST screen followed by the [BEACON
ON / OFF
4800 / 9600 / 19200 / 38400
OFF / GPS
OFF / GPS / WAY.P / DSP H / DSP A / DSP D
ON / OFF
ON / OFF
ON / OFF
ON / OFF
OFF
9600
OFF
OFF
ON
ON
ON
ON
70
in the APRS MESSAGE
TM