Yaesu FT2DR Instruction Manual page 13

APRS initial settings
®
4
Turn the DIAL to select the symbol
The following four symbol types can be selected as your
own symbol: "1", "2", "3" and "4".
If "4" is selected, symbol characters can be input directly
when "25 MY SYMBOL (User)" appears. * See the
following page on how to enter the characters.
5
Press the
The cursor will move to the "Code" area of the table
below. You can turn the DIAL to change the symbol to a
frequently used one (selectable from the symbols shown
inside the box of P.11).
Remark
The default value of each symbol is as follows.
MY SYMBOL
1
2
3
4
6
Press the
The symbol of your own station will be set.
7
Press
To exit the set mode and return to the operating screen.
y Entering a symbol character directly
You can enter a symbol character directly if the symbol that you want is not available.
1
Press the
The Set Mode Menu will appear.
2
Touch [APRS]
key
Code Symbol
[ /[ ]
[ /b ]
[ /> ]
[ YY ]
key
key for one second or longer
Human
Bicycle
Car
Yaesu Radio
12