Auto Off; Localization - Fluke TiS10 User Manual

Auto Off

The Auto Off timer is user-defined separately for the LCD
and power.
Auto Off is automatically disabled when the
Imager is connected to ac power.
To set the Auto Off feature:
1. Go to Settings > Auto Off.
2. Push Y/Z to highlight LCD Time Out or Power
Off.
3. Push W/X to set the timer between 1 minute and
120 minutes.
4. Push  to set.

Localization

The Imager has several settings for localization:
•
Date
•
Time
•
Language
•
Decimal Separator
Note
Performance Series Thermal Imagers
Date
The date can be displayed in one of two formats:
MM/DD/YY or DD/MM/YY.
To set the date:
1. Go to Settings > Date.
2. Push W/X to highlight the date format.
3. Push  to set a new format.
4. Push W/X to highlight Set Date.
5. Push  to open the Set Date menu.
6. Push Y/Z to select highlight day, month, or year.
7. Push W/X to change the settings.
8. Push  to set the date and exit the menu.
Time
To set the time:
1. Go to Settings > Time.
Time displays in two different formats: 24 hour or 12
hour. To set the time format:
2. Push W/X to highlight time format.
3. Push  to select.
4. Highlight Set Time.
5. Push  to open the Set Time menu.
Menus
31