Fluke TiS Series Quick Start

Center Spot Temp.
Indicator
Battery Life
Indicator
F1 F2
1. MEMORY:
Insert SD memory card into the slot under the rubber cover on the top of the camera.
2. POWER:
Insert a fully charged battery into the base of the hand grip. The battery life is indicated in the bottom
left corner of the LCD display. You can also press and hold the battery symbol on the side of the battery.
3. START:
Press the Power button until you hear an audible tone signaling camera startup.
•
Swing the attached lens cover up and lock in the open position on the top of the camera.
•
The LCD display will turn on and you will see the default start up screen (as above) showing a live infrared
image.
•
To turn the camera off, press the Power button until an audible tone signals it is powering down.
4. FOCUS:
Focus is manual.
•
To manually focus, adjust the focusing ring either clockwise or counter clockwise to optimize image focus
5. AUTO ADJUST (Level and Span):
Mode, depress and hold the F1 button and the imager will change to Auto mode.
•
Auto mode is additionally accessible through the menu screens. Depress the F2 button to open the Menu, and
with the directional buttons select Measurement. Then select Set Level/Span. To select auto, highlight it with
the directional buttons and then depress F1.
6. MANUAL ADJUST (Level & Span):
Mode, depress and hold the F1 button and the imager will change to Manual mode.
•
Manual mode is additionally accessible through the menu screens. Depress the F2 button to open the Menu,
and with the directional buttons select Measurement. Then select Set Level/Span. To select Manual highlight
it with the directional buttons and then depress F1.
•
While in Manual mode, a one-time auto adjust of level and span can be made by depressing the F3 button.
© 2017 The Snell Group / 322 N. Main St. / Suite 8 / Barre, VT 05641 / 800.636.9820
Auto/Lock
Mode Indicator
Level & Span
Indicator
Power Button
F3
Auto Level and Span can be selected two ways. If operating in Manual
Manual Level and Span can be selected two ways. If operating in Auto
QuickStart:
Trigger
(Pause/Un-pause)
1
FLUKE TiSXX
Memory Card Slot
Power/Charge
Lens Cover
(Swing up and lock)
IR Focusing Ring
/ www.thesnellgroup.com