How To Use The Menus; Image Capture; Ir-Photonotes - Fluke TiS10 User Manual

TiS10, TiS20, TiS40, TiS45, TiS50, TiS55, TiS60, TiS65
Users Manual

How to Use the Menus

The menus, coupled with the function buttons and arrow
buttons, are the access point for:
•
Thermal image display
• Camera features
•
Measurement
• Advanced functions
•
Memory review
•
Settings for date, time, language, units, file format
•
Information about the Imager
To open the primary menu, push . The primary menu
shows these secondary menus: Measurement, Image,
Camera, Memory, and Settings. The text labels on the
bottom edge of the screen correspond to the , ,
 buttons. You can use the buttons for these functions:
•
Push  to open the primary menu.
•
Push WXYZ to cycle through the
secondary menus. Each secondary menu lists an
options menu.
•
Push WXYZ to cycle through the options.
The primary and secondary menus close 10 seconds after
the last push of a function button. The option selection
menu stays open until you make the selection, go up a
menu level, or cancel the action.
12

Image Capture

Point the Imager at the target object. Make sure that the
object is in focus. Pull and release the primary trigger. This
will capture and freeze the image. To cancel the captured
image, pull the primary trigger again or 3 to return to
the Live view.
Depending on the selected file format settings, the Imager
shows the captured image and a menu bar. The menu bar
lets you save the image, edit some image settings, and
add voice annotation or IR-PhotoNotes™ digital photos.
To change the file format, see File Format on page 30.

IR-PhotoNotes™

Depending on the model, use the IR-PhotoNotes™ photo
annotation system to capture and add up to three visible
(digital) images of various objects:
Model:
TiS60, TiS65
TiS50, TiS55
TiS40, TiS45, TiS10, TiS20
You can include text or other information that is related to
the analysis and reporting of the infrared image. Examples
of possible annotations include motor name plates, printed
information or warning signs, larger views of the
environment or room, and related equipment or objects.
Up to three images can be captured with the visible image
that is stored in addition to the aligned infrared and visible
images used in IR-Fusion
images are only available in the .is2 file format and are
# of images:
3
1
feature not available
®
technology. These visible