How To Save Your Work - Toshiba Tecra 500CS User Manual

000-book.bk : 04-basic.fm5 Page 95 Wednesday, May 15, 1996 3:50 PM
The numeric overlay
To turn the numeric overlay on and off, press
numeric lock light on the indicator panel shows whether the
numeric overlay is on or off.
You can still use the overlaid keys to type alphabetic characters
while the numeric overlay is on. To do so:
for lower case letters, hold
for upper case letters, hold
keys.
The keys of the numeric overlay also act as a cursor control over-
lay, providing the ↑, ↓, ←, and → keys, as well as
,
End PgUp
numeric overlay is on, press and hold
lay keys. To return to the numeric overlay, release
information about the cursor control overlay, refer to "The Cursor
Control Overlay" on page 296.

How to Save Your Work

When you're working in a document, all your work exists in the
computer's temporary memory. When you turn the computer off,
everything in memory is lost. Therefore, it's important to save
Part I: Getting To Know Your Computer
Learning the Basics
How to Save Your Work
.
/
down while you press the keys.
Fn
+
Fn Shift
and . To use the cursor control keys when the
PgDn
95
+ . The
Fn F11
down while you press the
, ,
Ins Del Home
while you use the over-
Shift
. For more
Shift
,