Toshiba Tecra 500CS User Manual page 208

000-book.bk : 10-desk.fm5 Page 229 Thursday, May 16, 1996 2:07 PM
3 See the keyboard's documentation for additional
configuration steps.
4 Turn the computer on.
Disconnecting the External Keyboard
To disconnect the PS/2 keyboard:
1 Save your files.
2 Turn the computer off.
3 Remove the keyboard connector from the PS/2 mouse/key-
board port.
4 Turn the computer on again.
Making Your External Keyboard Pretend it Has the Fn Key
An external keyboard doesn't have the
built-in keyboard. If you use the computer's hotkeys or have set up
key combinations in Fn-esse, you'll probably miss these features
when using an external keyboard. Don't worry: with the Fn Key
Equivalent option, you can make your external keyboard act as
though it had an
You can set the Fn Key Equivalent option with TSETUP, Fn-esse,
or through the Windows Control Panel. To find out how to set this
option using Fn-esse, see "Using Fn-esse with an External Key-
board" on page 293. To find out how to set this option using
TSETUP, see "TSETUP" on page 427.
To set the Fn Key Equivalent option through the Windows Con-
trol Panel, follow these steps:
1 Click Start, then point to Settings.
2 Click Control Panel.
Windows 95 displays the Control Panel.
3 Double-click the Keyboard icon.
Windows 95 displays the Keyboard Properties dialog box.
Part I: Getting To Know Your Computer
Using Your Computer on Your Desk
Using an External Keyboard
key provided by the
Fn
key.
Fn
229