Toshiba Tecra 500CS User Manual page 118

000-book.bk : 04-basic.fm5 Page 117 Wednesday, May 15, 1996 3:50 PM
Chassis
Removing the diskette drive module from the external chassis
3 Pull the diskette drive module out of the chassis and set it
aside.
Prepare the Computer
Before swapping drive modules in the SelectBay, shut down the
computer.
Make sure the power is off before you swap a module into or
out of the SelectBay. Removing or inserting a module while
the computer is on may damage the computer, the drive or
both.
Remove the Module from the SelectBay
Follow these steps to remove the module from the SelectBay:
Opening the module cover
1 Slide the SelectBay module lock on the front of the
computer to the right, unlocking the SelectBay module.
Part I: Getting To Know Your Computer
Learning the Basics
Swapping Drives in the SelectBay
Diskette drive module
SelectBay module lock
117