Toshiba Tecra 500CS User Manual page 24

000-book.bk : 02-start.fm5 Page 23 Wednesday, May 15, 1996 3:50 PM
A half-sized memory module inserted correctly
9 Press the free edge of the memory module into the slot
until the clips snap into place, securing the memory
module.
10 If you've installed a full-sized memory module, secure the
module by replacing the two screws you removed in step 6.
11 Replace the memory slot cover.
12 Replace the screws you removed in step 4.
13 Turn the computer over.
When you turn your computer on, it recognizes the additional
memory automatically.
Removing a Memory Module
To remove a memory module, follow these steps:
1 Remove the memory slot cover, following steps 1 through
6 in the previous section, "Install the Memory Module."
Part I: Getting To Know Your Computer
Let's Start at the Very Beginning...
Adding Memory (Optional)
23
Clips