Toshiba Tecra 500CS User Manual page 476

000-book.bk : 84w4wg.fm5 Page 499 Wednesday, May 15, 1996 4:15 PM
MaxTime
MaxTime opens automatically each time you start Windows for
Workgroups. If MaxTime is not already open, go into Program
Manager and double-click the MaxTime icon in the Toshiba
Utilities program group.
MaxTime controls your system's power saving options. These
options are also available through TSETUP. For information
about what each option does, read "TSETUP" on page 427.
Hardware Setup
To start Hardware Setup, go into Program Manager and double-
click the Hardware Setup icon in the Toshiba Utilities program
group.
Use Hardware Setup to control your hardware configuration.
These options are also available through TSETUP. For informa-
tion about what each option does, read "TSETUP" on page 427.
TSETUP
To open TSETUP, follow these steps:
1 Close any programs you are running and exit Windows, if
it's open.
Run TSETUP outside of Windows, at a system prompt. If you
run TSETUP from an MS-DOS session under Windows by
clicking the MS-DOS prompt icon, results can be unpredict-
able.
2 At the system prompt, type
Once you've opened TSETUP, it operates as described in
"TSETUP" on page 427.
Part III: Appendixes
Using Windows for Workgroups
Running Programs Described in the Guide
499
and press
c:\dos\tsetup Enter
.