Toshiba Tecra 500CS User Manual page 404

24-tset.fm5 Page 427 Thursday, May 16, 1996 2:21 PM
TSETUP
TSETUP only runs outside of Windows 95, at a system
prompt.
TSETUP is an MS-DOS-based program you can use to configure
your system. To open TSETUP, follow these steps:
1 From Windows 95, Click Start, then click Shut Down.
Windows 95 displays the Shut Down Windows dialog box.
2 Click Restart the computer in MS-DOS mode, then click
Yes.
Windows 95 shuts down the computer, then restarts it in
MS-DOS mode and displays a system prompt.
3 At the system prompt, type
TSETUP displays the first page of the System Setup screen.
The TSETUP options are arranged on two pages. The following
sections describe how to make changes in TSETUP and list the
setup options on each page.
and press
c:\dos\tsetup Enter
427 427
.