Setup - Graco Mark X Operation Manual

Electric airless sprayers

Hide thumbs Also See for Mark X:

Table of Contents

Enlarged version

Setup

1. Connect Graco 50 ft airless hose to sprayer.

Remove adapter fitting for 1/2 in. hose. Tighten

securely.

If using optional hopper, install 45 elbow then con-

nect the hose to the elbow.

2. Optional: Install adapter and 11 ft 10 in. whip hose

to other end of 50 ft airless hose.

3. Optional: Install adapter and whip hose to fluid inlet

of spray gun.

ti18422a

ti19010a

ti7539b

ti14045a

4. Tighten securely.

5. Engage gun trigger safety.

6. Remove tip guard

ti2769a

7. Check inlet strainer for clogs and debris.

8. Fill throat packing nut with Graco TSL to prevent

premature packing wear. Do this each time you

spray.

ti7541a

ti18199a

ti17608a

ti18421a

3A2575A

Table of Contents