Panasonic UF-580 Service Manual page 31

2.2.10. SC PC Board (1001), ILS PC Board (1006), SNS4 PC Board (1007)
(3)
(6)
(2)
(7)
(9)
(8)
(10)
(1) Remove the Left Cover (Refer to 2.2.2.).
(2) Disconnect all Connectors on SC PC Board.
(3) Remove 9 Screws (19).
(7 Screws for UF-580/780)
(4) Remove the SC PC Board (1001).
(3)x9
(5) Move all Harnesses away from the front of the
Door Sensor.
(6) Release the Latch Hook and remove the ILS PC
Board (1006).
(7) Disconnect Connector CN73 on the ILS PC
Board (1006).
(8) Disconnect Connectors CN85 and 87 on the
SNS4 PC Board.
(9) Remove 1 Screw (19).
(10) Lift up the Paper Exit Actuator (730) and
remove the SNS4 PC Board (1007).
31