Using The Bios Setup Utility; About The Bios Setup Utility - Gateway 930 series System Manual

Using the BIOS
Setup Utility

About the BIOS Setup utility

The server's BIOS has a built-in setup utility that lets you configure several
basic system characteristics. The settings are stored in battery-backed RAM and
are retained even when the power is off.
Open the BIOS Setup utility by restarting the server, then pressing F1 when
the Gateway logo screen appears during startup. The Main BIOS Setup utility
screen opens. It may not look exactly like the screen shown below.
Main
AMI BIOS Version
BIOS Build Date
Processor Type
Processor Speed
System Memory
BIOS Setup Utility
Advanced Power
: XX.XX.XX
: XX/XX/XX
BIOS ID : XXXXXXXX
: Pentium III(tm)
: 1000MHz
: 256 MB
System Time : [XX:XX:XX]
System Date : [Thu XX/XX/XXXX]
Boot Security
←→ Select Screen
↑↓ Select Item
-+ Change Field
Tab Select Field
General Help
F1
Save & Exit
F10
Exit
ESC
About the BIOS Setup utility
5
Exit
83