Furuno TZT9 Installation Manual page 26

3. SETTING UP THE EQUIPMENT
4. Select time difference between local time and UTC time to use local time from the
pull-down list.
5. Select [Language] to show its option window.
6. Select the language to use.
7. Drag the main menu to select [Units], and set the units to show on the display.
Menu item
[Bearing Display]
[True Wind Calculation
Reference]
[Position Format]
[Loran C Station & GRI]
[Range (Long)]
[Range (Short)]
[Short/Long Change Over]
[Depth]
[Height/Length]
[Temperature]
[Boat Speed]
[Wind Speed]
[Atmospheric Pressure]
[Oil Pressure]
[Volume]
[Reset Default Settings]
3-4
Local Time Offset
UTC -06:00
UTC -05:00
UTC -04:00
UTC -03:00
UTC -02:00
Manual Demo Speed
Language English (United States)
Check for Software Update
Reset Default Settings
[Menu Units] sub menus
[True], [Magnetic]
[Ground], [Surface]
[DDD°MM.mmmm'], [DDD°MM.mmm'], [DDD°MM.mm'],
[DDD°MM'SS.ss"], [DDD.dddddd°], [Loran C], [MGRS]
[GRI]
[Master]
[First (Second) Slave]
[Correction First (Second)
Slave]
[Nautical Mile], [Kilometer], [Mile]
[Foot], [Meter], [Yard]
Set the distance at which to change between short and long range. Set
the long range here.
[Foot], [Meter], [Fathom], [Passi Braza]
[Foot], [Meter]
[Fahrenheit Degree], [Celsius Degree]
[Knot], [Kilometer per Hour], [Mile per Hour], [Meter per Second]
[Knot], [Kilometer per Hour], [Mile per Hour], [Meter per Second]
[HectoPascal], [Millibar], [Millimeter of Mercury], [Inch of Mercury]
[KiloPascal], [Bar], [Pound per Square Inch]
[Gallon] (Gallon & Gallon/hour), [Liter] (Liter & Liter/hour)
Restore default unit settings.
UTC -06:00
5.0 kn
Update
Reset
Options
Select GRI code.
X: Upolu Point, Y: Kure Island
Enter a position offset to refine Loran C
position.
-