Rear Vent - Hearth and Home Technologies BE-32 Owner's Manual

B.

Rear Vent

Fold the tabs toward the center of the fi re plug
Figure 7.6
(90°) and remove the insulation gasket.
Cut the metal retaining band and fold the
Figure 7.7
sides out.
Fold the center parts of the retaining band out
Figure 7.8
and use to remove the vent cap.
24
Hearth & Home Technologies • BE-32 • InD • 2099-985 Rev. C • 9/06
Discard the vent cap, remove and discard the
Figure 7.9
insulation basket. Note: Once the vent cap has been re-
moved it CANNOT be reattached.
Attach the fi rst vent section (it will snap into
Figure 7.10
place). Slide the insulation gasket onto the vent section,
up against the appliance and over the tabs.