Using The Console Port - D-Link DWL-7700AP User Manual

DWL-7700AP User's Manual

Using the Console Port

You can connect to the DWL-7700AP console port to configure device settings via the command
line.
1. Connect one end of the provided serial console cable to the console port on the DWL-7700AP,
and the other to an available serial port on the PC you wll use to connect to the device.
. Run HyperTerminal on the PC:
• Go to the Start Menu
• Select All Programs
• Select Accessories
• Select Communications
• Select HyperTerminal
3. Enter a New Connection name:
D-Link Systems, Inc.
65