Home > Advanced Settings > Multi-Ssid - D-Link DWL-7700AP User Manual

Hide thumbs Also See for DWL-7700AP:

Table of Contents

DWL-7700AP User's Manual

Home > Advanced Settings > Multi-SSID

If you want to configure the Guest and Internal networks on Virtual LAN (VLAN), the switch and

DHCP server you are using must also support VLANs. As a prerequisite step, configure a port

on the switch for handling VLAN tagged packets as described in the IEEE80.1Q standard.

Enable Multi-SSID:

Enable VLAN State:

Enable Priority

D-Link Systems, Inc.

Check to enable Multi-SSID.

Check to enable VLAN.

You can enable this function to set a priority to each SSID. Working with

80.1p and 80.1q, improve the user experience for audio, video and voice

applications.

Band:

Selected IEEE80.11a or IEEE80.11g.

Index:

You can select up to 7 multi-SSIDs. The default multi-SSIDs is the primary,

which puts the total to 8 multi-SSIDs.

SSID:

Service Set Identifier (SSID) is the name designated for a specific wireless

local area network (WLAN). The SSID's factory default setting is dlink. The

SSID can be easily changed to connect to an existing wireless network or

to establish a new wireless network.

Table of Contents