Nautilus StairMaster ClubTrack 2100 Series Service Manual page 86

Appendix D
Switched Range Meter
Set here to check DC
voltage
20 will be the most used
setting for measuring
DC voltage output
Set here to check
resistance (ohms)
Or here to listen for
an audible response
(useful when testing a
sensor)
Autoranging Meter
Set here to check AC
or DC voltage
Set here to check
resistance (ohms)
81
Set here to check AC
voltage
These are for
checking amps and
are not needed for
our purposes
Black (negative) lead
always goes here
Set here for an
audible response
The remaining three
are for amps settings
Black (negative) lead
always goes here
®
ClubTrack 2100 Series Treadmill Service Manual