Error Reporting; Error List - Nautilus StairMaster ClubTrack 2100 Series Service Manual

Error Reporting

Table 3–2. Electronic Issues
Problem
Walking belt stops, and no error
message appears.
CHR does not work.

Error Reporting

The current lists of errors are for the firmware version LED 1.0 and LCD 5.0. The system reports various problems to
the user via the display. The format includes the text line reporting the error.
Definitions
Warning—A message that appears on the console display that informs you of a condition that requires attention
but does not stop treadmill operation.
Error—A message that appears on the console display that informs you of a condition that halts the operation of
the treadmill and which requires immediate attention.
Table 3–3. Error List
Label Type
NO ERROR N/A
PROGRAM Error
ERROR
STATIC RAM Error
ERROR
EEPROM ERROR Error
TM HW COM Error
ERROR
TM COM ERROR Error
DRIVE ERROR Error
32
Possible Causes
User hit the Ergo stop button.
Ergo PCB is not grounded.
Contact plates have excessive
moisture under them.
Response
Displayed in the Error Log if no
events.
Start-up—Stops operation.
Start-up—Stops operation.
Start-up—Stops operation.
Anytime—Goes to idle. Treadmill
slowly stops.
Anytime—Goes to idle. Treadmill
slowly stops.
Program operation—Goes to idle.
Treadmill stops quickly.
Remedy
• Press START to resume
workout.
• Ground the Ergo PCB.
• Replace the contact plates if
cleaning them first does not
resolve the problem.
• Replace the CHR PCB.
Description
Placeholder label.
ALL—Microprocessor fails self-test
program memory check sum error.
Display will be blank and the console
will beep twice.
ALL—Microprocessor fails self-test
RAM check sum error. Display will be
blank, and the console will beep. It
will beep three times for an Internal
RAM error. It will beep four times for
an external RAM error.
ALL—Microprocessor fails self-test
EEPROM chksum error. All of the
EPROM values will be loaded with
the defaults. No error message
appears.
Treadmill UART hardware link failure.
Treadmill E204 drive communication
failure low.
Treadmill E209 output switching fault
low.
®
ClubTrack 2100 Series Treadmill Service Manual