Diagnostic 2 - Nautilus StairMaster ClubTrack 2100 Series Service Manual

Diagnostic 2

Table 2–33. Serial Tests
Step No. Press Keys On Console
1 CLEAR, 6, 2
2 ENTER
3 CLEAR
4 CLEAR
Table 2–34. Bus Volts
Step No. Press Keys On Console
1 CLEAR, 6, 8
2 ENTER
3 CLEAR TWICE
Table 2–35. Grade Act
Step No. Press Keys On Console
1 CLEAR, 6, 9
2 ENTER
3 CLEAR TWICE
Diagnostic 2
The DIAGNOSTIC 2 settings allow you to view the machine's error log and reset or change the maintenance hours
between service calls.
To scan through and change the owner-defined codes, perform the following steps:
Table 2–36. Diagnostic 2
Step No. Press Keys On Console
1 CLEAR, 7, ENTER
2
INCLINE UP or INCLINE DOWN
3 ENTER (not necessary for
maintenance hours)
4
INCLINE UP or INCLINE DOWN
5 CLEAR
6 CLEAR
To view a particular machine status without having to scan through all the choices, perform the following steps for
that listed option:
26
Display (What you will see)
SERIAL TESTS
RUNNING, PASS, or FAIL
DIAGNOSTIC
THE RESULTS YOU WANT
Display (What you will see)
BUS VOLTS
BUS VOLTS xxx (where "x" is the
drive board bus voltage reading)
THE RESULTS YOU WANT
Display (What you will see)
GRADE ACT
GRADE ACT x.x (where "x" is the
actual grade setting)
THE RESULTS YOU WANT
Display (What you will see)
DIAGNOSTIC 2
ERROR LOG, MAINT HOURS
Selects the option you want and
displays the results
Error codes
DIAGNOSTIC 2
THE RESULTS YOU WANT
®
ClubTrack 2100 Series Treadmill Service Manual