Optimizing The Image - BenQ MP776 User Manual

Optimizing the image

Optimizing the image Optimizing the image Optimizing the image
Using Wall Color Using Wall Color
Using Wall Color Using Wall Color
In the situation where you are projecting onto a colored surface such as a painted wall which
may not be white, the Wall Color feature can help correct the projected picture's colors to
prevent possible color difference between the source and projected pictures.
To use this function, go to the DISPLAY
color which is closest to the color of the projection surface. There are several precalibrated
colors to choose from: Light Yellow
Selecting a picture mode Selecting a picture mode Selecting a picture mode Selecting a picture mode
The projector is preset with several predefined picture
modes so that you can choose one to suit your
operating environment and input signal picture type.
To select an operation mode that suits your need, you
can follow one of the following steps.
• Press MODE/ENTER MODE/ENTER on the projector or remote MODE/ENTER MODE/ENTER
control repeatedly until your desired mode is
selected.
• Go to the PICTURE PICTURE > > > > Picture Mode
PICTURE
press /
The picture modes are listed below.
1. Dynamic mode Dynamic Dynamic Dynamic
suitable for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
2. Presentation mode (Default) Presentation
Presentation Presentation
emphasized in this mode to match PC and notebook coloring.
3. sRGB mode sRGB sRGB sRGB mode: Maximizes the purity of RGB colors to provide true-to-life images mode mode
regardless of brightness setting. It is most suitable for viewing photos taken with an
sRGB compatible and properly calibrated camera, and for viewing PC graphic and
drawing applications such as AutoCAD.
4. Cinema mode Cinema Cinema Cinema
cameras or DVs through the PC input for best viewing in a blackened (little light)
environment.
5. User 1/ / / / User 2 User 1 User 2 mode
User 1 User 1 User 2 User 2
picture modes. See
Setting the User 1 Setting the User 1/ / / / User 2
Setting the Setting the User 1 User 1
There are two user-definable modes if the current available picture modes are not suitable
for your need. You can use one of the picture modes (except the User 1
and customize the settings.
1. Press MENU/EXIT MENU/EXIT to open the On-Screen Display (OSD) menu. MENU/EXIT MENU/EXIT
2. Go to the PICTURE
3. Press
4. Press
32 Operation
DISPLAY DISPLAY > Wall Color DISPLAY
Light Yellow, Pink Light Yellow Light Yellow Pink, Light Green Pink Pink
Picture Mode menu and
PICTURE Picture Mode Picture Mode
to select a desired mode.
mode mode: Maximizes the brightness of the projected image. This mode is mode
mode (Default): Is designed for presentations. The brightness is
mode (Default) mode (Default)
mode mode mode: Is appropriate for playing colorful movies, video clips from digital
mode: Recalls the settings customized based on the current available
mode mode
"Setting the User 1/User 2 mode" on page 32
User 2 mode mode
User 2 User 2 mode mode
PICTURE > Picture Mode Picture Mode menu.
PICTURE PICTURE Picture Mode Picture Mode
/ / / / to select User 1 User 1 or User 2
User 1 User 1
to highlight Reference Mode Reference Mode Reference Mode. Reference Mode
http://www.pureglare.com.au
Wall Color menu and press Wall Color Wall Color
Light Green, Blue Light Green Light Green Blue, and Blackboard Blue Blue
User 2.
User 2 User 2
/ to select a
Blackboard. Blackboard Blackboard
for details.
User 1/2 /2 /2 /2) as a starting point
User 1 User 1