Lan Control; Reset All - BenQ MP776 User Manual

Function
(default setting / value)

Lan Control

Settings

Reset All

Settings
FAQ-Image
and
Installation
FAQ-
Features and
Service
Current
System
Status
Control By (RS232)
Control By Control By Control By
DHCP (On)
DHCP
DHCP DHCP
Projector IP Address Projector IP Address Projector IP Address Projector IP Address
Subnet Mask Subnet Mask Subnet Mask Subnet Mask
Default Gateway Default Gateway
Default Gateway Default Gateway
DNS Server DNS Server DNS Server DNS Server
Apply Apply
Apply Apply
See "Controlling the projector through a Lan environment" on page 40
for details.
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Color Space Conversion, Language, Projector
Position, High Altitude Mode, Security Settings and Baud Rate.
Displays possible solutions to problems you may encounter.
Source Source
Source Source
Shows the current signal source.
Picture Mode Picture Mode
Picture Mode Picture Mode
Shows the selected mode in the PICTURE
Resolution Resolution
Resolution Resolution
Shows the native resolution of the input signal.
Color System Color System Color System Color System
Shows input system format: NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour Equivalent Lamp Hour Equivalent Lamp Hour Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
Firmware Version Firmware Version Firmware Version Firmware Version
Shows the firmware version of your projector.
http://www.pureglare.com.au
Description
PICTURE menu.
PICTURE PICTURE
Operation 51