Adjusting Sharpness - BenQ MP776 User Manual

This function is only available when User 1 or User 2 mode is selected up in the Picture Mode
sub-menu item.
5. Press / / / / to select a picture mode that is closest to your need.
6. Press to select a menu item to be changed and adjust the value with
"Fine-tuning the image quality in user modes"
7. When all settings have been done, highlight Save Settings
store the settings.
8. The confirmation message "Setting Saved
Fine-tuning the image quality in user modes Fine-tuning the image quality in user modes Fine-tuning the image quality in user modes Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions available
when User 1 User 1 User 1 User 1 or User 2 User 2 User 2 User 2 is selected. Based on your needs, you can make adjustments to these
functions by highlighting them and pressing
Adjusting Adjusting Brightness Adjusting Adjusting Brightness Brightness Brightness
The higher the value, the brighter the image. And the
lower the setting, the darker the image. Adjust this
control so the black areas of the image appear just as
black and that detail in the dark areas is visible.
Adjusting Adjusting Contrast Adjusting Adjusting Contrast Contrast Contrast
The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the Brightness setting to suit your selected
input and viewing environment.
Adjusting Color Adjusting Adjusting Adjusting Color Color Color
Lower setting produces less saturated colors. If the setting is too high, colors on the image
will be overpowering, which makes the image unrealistic.
Adjusting Tint Adjusting Tint
Adjusting Adjusting Tint Tint
The higher the value, the more reddish the picture becomes. The lower the value, the more
greenish the picture becomes.
Adjusting

Adjusting Sharpness

Adjusting Adjusting Sharpness Sharpness Sharpness
The higher the value, the sharper the picture becomes. The lower the value, the softer the
picture becomes.
Save Settings and press MODE/ENTER Save Settings Save Settings
Setting Saved" displays.
Setting Saved Setting Saved
/
http://www.pureglare.com.au
below for details.
MODE/ENTER to MODE/ENTER MODE/ENTER
on the projector or remote control.
30
-30
Operation
/ / / / . See
50 70
0 30
33