KitchenAid 2003 M Technical Education page 59

7. With the door closed, remove the hex-
head screw from the door linkage at the
top of the door. NOTE: The door spring will
remain under slight tension when the door
is closed.
8. Use a pair of pliers and lift the end of the
linkage off the square post.
Door Linkage Screw
Square Post
9. Place a support under the door to prevent
it from falling.
10. Remove the four T27 screws from the
door hinge.
11. Lift the door so the bottom hinge is off the
pin and remove the door.
Door Hinge
(4 T27 Screws)
4-35