KitchenAid 2003 M Technical Education page 39

10. To remove the evaporator fan motor:
a) Pull the fan blade off the motor shaft.
b) Unclip the motor.
c) Disconnect the wire connector from the
harness.
Pull Fan Blade Off Motor Shaft
Unclip Motor
d) Remove the isolator from the motor.
Isolator
11. To remove the defrost heater:
Evaporator
Fan Motor
Wire Connector
4-15
a) Remove the two hex-head screws from
the evaporator fan motor shroud.
b) Unclip the bimetal from the evaporator
inlet tubing.
c) Disconnect the defrost heater and
evaporator fan motor connectors from
the wiring harness.
d) Remove the evaporator fan motor
shroud and the two side foam blocks.
Foam Blocks
Evaporator Fan Motor
Shroud Screws
Defrost Heater
Connector
Bimetal
Continued on the next page.
Evaporator
Fan Motor
Connector