Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug refrigerator or disconnect power.
2.
Open the freezer door.
3.
Remove the ice bin from the freezer door
(see page 4-24).
4.
Remove the two screws from the hex drive
shaft coupling holder and remove the cou-
pling assembly.
5.
Pull the coupler, seals, and bushing from
the hex drive shaft.
Screw (1 of 2)
Coupling Holder
REMOVING THE AUGER MOTOR
Coupler
Seals
Bushing
6.
Remove the spring from the top of the hex
drive shaft.
7.
Remove the containers from the freezer
door so you can access the motor housing
cover.
8.
Remove the two screws from the motor
housing cover and remove the cover.
Motor Housing Cover
9.
Disconnect the harness connector from
the motor terminals.
10. Remove the four screws from the auger
motor bracket.
Motor Connector
4-26
Spring
Screws
Screw (1 of 4)