Removing The Touch And Display Boards & The Motorized Air Door - KitchenAid 2003 M Technical Education

REMOVING THE TOUCH AND DISPLAY BOARDS
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Open the refrigerator door and remove the
items from the top shelf. If necessary,
remove the top shelf so you can easily
access the touch control assembly or the
motorized air door. The locations are shown
below.
Touch Control Assembly
Motorized Air Door
3. To remove the touch and display
boards:
a) Remove the three hex-head screws
from the back of the touch control as-
sembly and lower the assembly.
3 Screws At Back Of Control
& THE MOTORIZED AIR DOOR
b) Disconnect the two wire connectors
from the touch control assembly and
remove the assembly from the refrig-
erator.
c) Remove the two screws from the plas-
tic cover and remove the cover from the
touch control panel.
d) Disconnect the wire connector from the
end of the display board.
Display Board
Wire
Connector
e) Unclip the touch board from the locking
tabs and remove the board.
Touch Board
4-18
Wire Connectors
Cover
Screws
Board Tabs