Removing The Electronic Meat Pan Power Supply Board - KitchenAid 2003 M Technical Education

MEAT PAN POWER SUPPLY BOARD
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Remove the main and louvered decora-
tive panels (see page 4-2).
3. Remove the eight screws from the unit
compartment front cover, and pull the cover
forward out of the way (see page 4-2).
Electronic Meat Pan Power Supply
4. Remove the main control board assembly
from the unit (see page 4-9 for the proce-
dure).
5. Remove the hex-head mounting screw
from the meat pan power supply board
enclosure (see the photo at the top of the
right column).
6. Remove the hex-head screw from the
meat pan power supply green ground wire
at the chassis.
REMOVING THE ELECTRONIC
Electronic Meat Pan Power Supply
Enclosure Screw
7. Pull the meat pan power supply assembly
forward as far as it will go, and turn it over
so you can access the board.
8. Disconnect the two wire connectors from
the meat pan power supply board.
9. Remove the meat pan power supply board
from the three standoffs. Press in the
locking tab on each standoff to release the
board.
4-10
Ground Wire Screw
Wire
Connectors
Meat Pan Power
Supply Board