Comtech EF Data CDM-600 Operating Instructions Manual page 189

CDM-600 Satellite Modem
Remote Control
Command
Arguments for
Parameter
(Instruction Command or
Code and Response to
Type
Query
Qualifier)
Configuration CST= 1 byte, value
Save of 0 thru 9
Configuration CLD= 1 byte, value
Load of 0 thru 9
ReCenter RCB= None
Buffer
RTC Date DAY= 6 bytes
RTC Time TIM= 6 bytes
Description of Arguments
Command only.
Command causes the CDM600 to store the current
modem configuration in Configuration Memory location
defined by the one-byte argument (0 to 9).
Example: CST=4 (store the current configuration in
location 4)
Command only.
Causes the CDM600 to retrieve a previously stored
modem configuration from Configuration Memory
location defined by the one-byte argument (0 to 9).
Example: CLD=4 (load modem configuration from
location 4 to be the active configuration)
Command only.
Forces the software to recenter the receive
Plesiochronous/Doppler buffer.
Note: This command takes no arguments.
Example: RCB=
Command or Query.
A date in the form ddmmyy (international format), where
dd = day of the month (01 to 31),
mm = month (01 to 12)
yy = year (00 to 99)
Example: DAY=240457 (April 24, 2057)
Command or Query.
A time in the form hhmmss, indicating the time from
midnight, where:
hh = hours (00 to 23)
mm = minutes (00 to 59)
ss = seconds (00 to 59)
Example: TIM=231259 (23 hours:12 minutes:59 seconds)
16–27
MN/CDM600.IOM
Query
Response
(Instruction
to Response to Query
Code and
Command
Qualifier)
CST= N/A N/A
CST?
CST*
CST#
CLD= N/A N/A
CLD?
CLD*
CLD#
RCB= N/A N/A
RCB?
RCB*
RCB#
DAY= DAY? DAY=ddmmyy
DAY? (see description of
arguments)
DAY*
DAY#
TIM= TIM? TIM=hhmmss
TIM? (see description of
arguments)
TIM*
TIM#
Revision 7