Comtech EF Data CDM-600 Operating Instructions Manual page 179

CDM-600 Satellite Modem
Remote Control
Command
Arguments
Parameter (Instruction for Command
Type Code and or Response
to Query
Qualifier)
Rx Data RDR= 9 bytes
Rate
Priority System = RIT (Highest priority) , RFM, RFT, RMD, RCR, and RDR (Lowest Priority), indicated by shading. Any change to a higher priority parameter
can override any of the parameters of lower priority.
Exception: Select INSERT or D&I++ mode using RFM (Receive Framing type) which is highest priority
Description of Arguments
Command or Query.
Rx Data Rate, in kbps, between 2.4 kbps to 20 Mbps.
Resolution=1 bps
Example: RDR=02047.999.
For Hardware Version 2.0 or higher, and Firmware 1.3.1
or higher, additional auxiliary G.703 sub-rates are
available. These are selected using:
00512.AUX
01024.AUX
02048.AUX
The connectors used for the Aux rates are IDI/DDO.
These Aux rates are not available with D&I or IDR.
16–17
MN/CDM600.IOM
Query
Response
(Instruction
to Response to Query
Code and
Command
Qualifier)
RDR= RDR? RDR=xxxxx.xxx
RDR? (see description of
arguments)
RDR*
RDR#
Revision 7