Troubleshooting Guide - Razor iMod Owner's Manual

TroubleShooTing guide

Problem
Sometimes the iMod
doesn't run, but other
times it does
Charger gets warm during
use
iMod does not stop when
applying the brake
iMod makes loud noises or
grinding sounds
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call toll-free
at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
Possible Cause
Loose wires or connectors
Motor or electrical switch damage
Normal response to charger use
Brakes are not adjusted properly
Chain adjustment is too tight or too
loose
Chain is too dry
Solution
Check all wires around and all connectors to make sure they are tight.
Contact your local Razor authorized service center for diagnosis and repair.
No action required. This is normal for some chargers and is no cause for
concern. If your charger does not get warm during use, it does not mean
that it is not working properly.
Refer to adjusting the brakes instructions on page 4.
Refer to instructions on page 6 of this manual to properly adjust chain and
sprocket.
Apply a lubricant such as 3 in 1
9
TM TM
or Tri-Flow to the chain.