Razor iMod Owner's Manual page 6

ASSEMBLY AND SET-UP
q Installing batteries for speakers
Battery Port
1
Open the battery port located
under the power controller. Install
4AA batteries in the battery port.
(Batteries not included)
q Attaching your iPod
1
Open the iPod compartment and
attach player to the 30 pin connec-
tor. Place the iPod in the compart-
ment and securely fasten the cover.
q Inflating the Tires
Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and
your purchase.
1
Using a bicycle style tire pump
equipped for a Schrader-type valve,
inflate the tires to the PSI
indicated on the sidewall of the
tires.
*The iPod product name is used for identification purposes only.
iPod is a registered trademark of Apple Inc.
B
C
2
A.) To turn on speakers, press the power
button.
B.) To turn on iPod function, press the iPod
button.
C.) To listen to the FM Radio, press the FM
button.
D.) FM stations are adjusted by the buttons
on the bottom of controller.
E.) Volume adjuster ( )
E
A
D
5
WARNING: It is your
responsibility to secure your iPod
player. Razor is not responsible for
iPod damage.
Note: This product was designed
to accommodate ONLY iPods in
production as of January 2008. Not
recommended for use with video
iPod players.
Note: The pressurized air supplies
found at gasoline stations are
designed to inflate high-volume
automobile tires. If you decide to
use such an air supply to inflate
your iMod tires, first make sure the
pressure gauge is working, then
use very short bursts to inflate to
the correct PSI. If you inadvertently
over-inflate the tire, release the
excess pressure immediately.