Expansion Board - HP ProLiant DL320e Gen8 Maintenance And Service Manual

Remove the server from the rack (on page 30).
o
Remove the access panel
4.
Disconnect all cables connected to existing expansion boards.
5.
Loosen the PCI riser cage thumbscrews.
6.
Lift the PCI riser cage to unseat the PCI riser boards.
7.
To replace the component, reverse the removal procedure.

Expansion board

To remove the component:
Power down the server (on page 28).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 29).
o
Remove the server from the rack (on page 30).
o
Remove the access panel
4.
Disconnect all cables connected to existing expansion boards.
5.
Remove the PCI riser cage
6.
("Access panel" on page 35).
("Access panel" on page 35).
("PCI riser cage" on page 46).
Removal and replacement procedures 47