HP ProLiant DL320e Gen8 Maintenance And Service Manual page 44

Extend the server from the rack (on page 29).
a.
Remove the server from the rack (on page 30).
b.
Remove the access panel
4.
Remove the air baffle
5.
Remove the heatsink ("Heatsink" on page 41).
6.
CAUTION: To avoid damage to the processor, do not touch the bottom of the processor,
especially the contact area.
CAUTION: The pins on the processor socket are very fragile. Any damage to them may require
replacing the system board.
Open the processor locking lever, and then open the processor retaining bracket.
7.
Grasp the processor by the edges, and then lift it out of the socket.
8.
To replace the component:
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To
avoid damage to the system board:
Do not touch the processor socket contacts.
•
• Do not tilt or slide the processor when lowering the processor into the socket.
("Access panel" on page 35).
("Air baffle" on page 35).
Removal and replacement procedures 44