Table of Contents
Advertisement
FCC Compliance
The MVME177 was tested in an FCC-compliant chassis, and meets
the requirements for Class A equipment. FCC compliance was
achieved under the following conditions:
1. Shielded cables on all external I/O ports.
2. Cable shields connected to earth ground via metal shell
3. Conductive chassis rails connected to earth ground. This
4. Front panel screws properly tightened.
For minimum RF emissions, it is essential that the conditions above
be implemented; failure to do so could compromise the FCC
compliance of the equipment containing the module.
General Description
The MVME177 is a double-high VMEmodule based on the
MC68060 microprocessor. The MVME177 has:
connectors bonded to a conductive module front panel.
provides the path for connecting shields to earth ground.
4/8/16/32/64/128/256 MB of ECC-protected DRAM
8KB of static RAM and time of day clock (with battery
backup)
Ethernet transceiver interface
Four serial ports with EIA-232-D interface
Four tick timers
Watchdog timer
4 MB of Flash memory
Two EPROM sockets
SCSI bus interface with DMA
General Description
1-5
1
Advertisement
Table of Contents
