Table of Contents
Advertisement
The Flash Fill test fills Flash memory according to the current test
configuration parameters selecting:
Command Input:
177-Diag>
Flash Patterns Test
The Flash Patterns test writes and reads various data patterns in
Flash memory according to the current test configuration
parameters selecting starting and ending blocks, and saving /
restoring of the Flash contents.
Note
Command Input:
177-Diag>
177-Bug>
177-Diag>
FLASH TESTS:.....................................Running->FAILED
FLASH/TESTS Test Failure Data:
Flash tests must be called individually and will only execute from
PROM. On many boards 177Bug is running in Flash memory.
Starting and ending block
The data to fill with
An increment/decrement value
flash fill
If you are running the Flash test and 177Bug itself
resides in Flash, the test will fail as shown in the
example below.
flash pats
sd
flash
Additions to FLASH Commands
B
B-49
Advertisement
Table of Contents
