Cleaning; Torque Spec's - Star Trac Spinner NXT 7000 Service Manual

Cleaning

1 General
Wipe the bike down after each use with a clean soft towel.
Keep the area well ventilated.
2 Daily
Cleaning the bike after each use with a non corrosive all purpose cleaner such as diluted
Simple Green®
3 Bi-Weekly
Applying a rust inhibitor such as LPS 1 will greatly inhibit the formation of rust.
Apply a small amount to a rag and wipe the bike down.
Concentrate on areas where rust forms
On steel bikes (Pro and Elite), remove handle bar and seat posts. Remove plastic sleeves and
thoroughly clean it and the inside of the frame (Stiff brush and cleaner works well). Wipe down
plastic with a rust inhibitor, as well as the inside of the tube.
Thoroughly clean the handlebar and seat posts, reassembly, and check for proper fit and
operation.

Torque Spec's

Tighten the pedals and crank arms weekly using the proper pedal wrench.
Weekly inspect all screws for proper tension using a torque wrench. Refer to the TORQUE spec table below.
Product Torque Specifications (Ref: 12 Inch pounds =1 foot pound)
Description
X X X Brake Spring Block Bolt
X X X Back Chain Guard Bolt
X X X Chain Guard Bolt
X X X Back Chain Guard Bolt
X X X Chain Tensioner Bolt
X X X Back Chain Guard Mounting Bracket Bolt
X X X Chain Guard Bolt
X X X Chain Guard Bolt
X - - Handlebar Sleeve bolt
X - - Handlebar bolt
X - - Handlebar bolt
X - - Seat Post Sleeve Bolt
X X X Crank Bolt
X X X BB Axle Nut
X X X Leg to Frame
X - - Leg to Frame
Star Trac Product Support
Welded Frame Corners (Pro & Elite)
Frame Edges (Pro & Elite)
Inside rim of flywheel (All Spinners)
Page 10 of 21
800-503-1221
Part
(kgf◦cm)
M6x1.0*30L
M5x0.8*16L
M5x0.8*50L
M4x0.7*12L
M6x1.0*16L
M5x0.8*16L
M5x0.8*30L
M5x0.8*16L
M4x0.7*12L
M8x1.25*16L
M8x1.25*16L
M4x0.7*12L
M8x1.0*22L
M20x1.0*6L
M10x1.5*55L
M10x1.5*65L
Torque Torque
(ft◦lbs)
20.0 -
15.0 -
15.0 -
10.0 -
25.0 -
25.0 -
25.0 -
15.0 -
5.00 -
70.0 -
70.0 -
5.00 -
414.0 30.0
140.0 10.0
96.0 7.0
96.0 7.0
Torque
(in◦lbs)
17.0
13.0
13.0
9.0
22.0
22.0
22.0
13.0
4.0
60.0
60.0
4..0
-
-
-
-