Fujitsu ETERNUS DX60 S3 User Manual page 712

Appendix A Parameter List
A.1 System Management
A.1.7.5 Setup SNMP Agent MIB Access View
For details about this function, refer to
For the factory default settings for this function, refer to
(page 981).
●
MIB Access View
• View Name
Description
Input condition/
Display contents
• Subtree#1 - Subtree#10
Description
Input condition/
Display contents
"1.8.5 Setup SNMP Agent MIB Access View" (page
Input the MIB View name.
The view name which has already been used cannot be entered.
•
Up to 32 alphanumeric characters and symbols ("! (exclamation mark)", "# (hash
mark)", "& (ampersand)", "_ (underscore)", "+ (plus)", "- (hyphen)", "* (asterisk)" and
"/ (slash)")
•
Spaces
Specify the MIB access range of the corresponding view in the subtree.
Input the subtree in the Object ID format (*1).
Select whether to include as or exclude from each subtree as the MIB access range.
One or more subtrees are required per view.
The same subtree cannot be specified multiple times in a single view. However, the
same subtree can be configured to different views.
*1: The "Object ID" is indicated by using "." (periods) in a format such as
"1.3.6.1.2.1.1".
The setting range of each value that is separated using "."(periods) is 1 - 65535.
A total of up to 251 characters can be entered (including periods).
The following values cannot be entered in the ETERNUS DX:
(1) Values starting with a period: ".1.3.6.1.2.1.1"
(2) Value ending with a period: "1.3. 6.1.2.1.1."
(3) Values with two consecutive periods: "1. . 3. 6. 1. 2. 1. 1"
(4) Values including "0": "1.3.6.1.2.0.1"
•
Subtree
-
Alphabetic characters, numeric characters ("1" - "65535"), and symbols
-
Spaces
-
Up to 251 characters
•
Inclusion
•
Exclude
712
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"Appendix B Setup SNMP Agent MIB Access View"
115).
P2X0-1270-13ENZ0