Chapter 2 Component Management
2.5 Turn on Locator Beacon/Turn off Locator Beacon
■
Turning on the LED
The procedure to turn on an LED is as follows:
Procedure
1
Click [Turn on locator beacon] in [Action].
If the LED is already turned on, [Turn on locator beacon] cannot be selected.
A confirmation screen appears.
2
Click the [OK] button.
The locator beacon is turned on.
3
Click the [Done] button to return to the screen when starting this function in
■
Turning off the LED
The procedure to turn off an LED is as follows:
Procedure
1
Click [Turn off locator beacon] in [Action].
If the LED is already turned off, [Turn off locator beacon] cannot be selected.
A confirmation screen appears.
235
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Step
1.
End of procedure
P2X0-1270-13ENZ0