Chapter 3 Volume Management
3.7 TPV Management
3.7.6
Stop Balancing Thin Provisioning Volume
This function stops TPV balancing
•
This function cannot be used when the TPV balancing is not being performed.
•
This function cannot be used when the specified TPV balancing is already complete.
When TPV balancing is stopped, data in volumes that are not balanced yet can be accessed normally.
The procedure to stop balancing of the Thin Provisioning Volume is as follows:
Procedure
1
Select the volume for which balancing is to be stopped and click [Stop Balancing] in
[Action].
A confirmation screen appears.
2
Click the [OK] button.
TPV balancing stops.
3
Click the [Done] button to return to the [Balancing Thin Provisioning Volume] screen.
293
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0